3-6mm Galvanized Wire Automatic Cutting Mesh Building Mesh Panel Welding Machine
Building Mesh Panel Welding Machine Introduction:
1. This building mesh panel welding machine adopts electrical & electronic synchronous control technique, both separate-phases welding and welding time composed of digital and integrated electric circuit, more intelligent and rational, press at one time, separate welding.
2. The line wire is fed from coil wires,the cross wire is pre-cut. which is fed from hopper driven by stepping motor. The line wire through the line wire straighten device. make the galvanized wire or steel wire straighten. Then the line wire is feed under the welding electrodes. To start welding.
3. Mesh pulling system adopts servo motor back and forward, adjusting the cross space by setting the parameters on the touch screen,different from traditional mechanical adjustment.
4. The welding speed is fast and it is easy to learn and operate. Only two operators are enough.
5. The cutting mesh panel machine is controlled by the control cabinet. You set the cut mesh length by touch screen in the control cabinet. The cutting mesh machine will cut the mesh panel as per your required cutting mesh length. Very easy to learn and master.
6. The finished product is mesh panel.
Building Mesh Panel Welding Machine Technical Parameters:
| No. | Item | Specification |
| 1 | Welding Wire Diameter | Φ3.0-6.0(mm) |
| 2 | Cross Wire Space | 50-250mm(adjustable) |
| 3 | Line Wire Space | 50-250mm(adjustable) |
| 4 | Mesh Width | Max.2500mm |
| 5 | Finished Products | construction mesh plate |
| 6 | Number of Electrodes | 48 |
| 7 | Welding Speed | 75-85times/min |
| 8 | Rated Voltage | Three phase,380V,50HZ or customized |
| 9 | Rated Power | 160KWA*6 (Water cooling system) |
| 10 | Main Motor | 5.5 KW (Electromagnetic Brake Motor) |
| 11 | Welding Time | 10ms-100ms |
| 12 | Welding Way | By Control Silicon Control Electric Resistance Weld |
| 13 | Pressure Mode | Adjustable Spring Pressure |
| 14 | Weight | About 4.5 T |
| 15 | Overall Dimension | 7000*3200*1700m |
Composition of building mesh panel welding machine:
| No. | Name of each part | Quantity/Set |
| 1 | Main Mesh Welding Machine | 1 |
| 2 | Cross Wire Automatic Falling Hopper | 1 |
| 3 | Servo Motor Pulling Mesh Device | 1 |
| 4 | Operation Control Cabinet | 1 |
| 5 | Wire Straightening and Cutting Machine | 2 |
| 6 | Level Spare Parts Box | 1 |
| 7 | Water Circle Pump | 1 |
| 8 | Repairing Mesh Machine | 1 |
| 9 | Cooling Water System | 1 |
| 10 | Installing Tool | 1 |
| 11 | Equipment Operation and Maintenance Manual | 1 |
Building Mesh Panel Welding Machine Applications:
The building mesh panel is widely used for construction of the mesh is generally use GongKuangYe under construction, commercial, transportation, construction of the wall with a net, floor heating net, decoration, landscape protection, civil, industry barrier, etc, especially in the construction industry, can be used as a nonbearing wall of the building, even is the main wall, balcony board construction mesh can be used.
Building Mesh Panel Welding Machine Packing:
Building Mesh Panel Welding Machine Photos:
Product Tags:
|
|
250A 6mm Galvanized Wire Construction Mesh Welding Machine Images
|
